# Google, Yahoo and Microsoft bulk sender rules explained

Source: https://dijituldns.co.uk/guides/google-yahoo-microsoft-bulk-sender-rules/
Updated: 2026-11-12

> Gmail and Yahoo have required bulk senders to use SPF, DKIM, DMARC, one-click unsubscribe and a spam rate under 0.3% since February 2024. Microsoft added SPF, DKIM and DMARC rules for Outlook.com from 5 May 2025. dijitul checks and fixes your records against all three at £45 an hour + VAT.

## Key facts

- Bulk sender: about 5,000 or more messages a day to personal Gmail, Yahoo or Outlook.com addresses
- Gmail: once you hit the threshold, Google treats you as a bulk sender permanently
- All three require SPF, DKIM and DMARC of at least p=none, aligned with your From address
- Gmail and Yahoo: one-click unsubscribe (RFC 8058) on marketing mail
- Gmail recommends handling unsubscribes within 48 hours; Yahoo says within 2 days
- Spam complaint rate: keep under 0.3%; Google recommends under 0.1%
- Microsoft: non-compliant mail goes to junk and may be rejected with 550 5.7.515
- Google says it began ramping up enforcement in November 2025

## Who counts as a bulk sender

Google's sender guidelines FAQ defines a bulk sender as one that sends close to 5,000 messages or more to personal Gmail accounts in 24 hours. Messages from the same primary domain count together, so mail sent from `news.example.co.uk` and `example.co.uk` adds up. Google also says that once you meet the threshold even once, you are permanently treated as a bulk sender. Microsoft uses the same 5,000 a day figure for mail to Outlook.com, Hotmail and Live addresses. Yahoo publishes a separate set of requirements for bulk senders without giving a fixed number.

Most small businesses never reach 5,000 a day. But the rules for all senders still apply to you, and a newsletter to a large list on one day can be enough to cross the line.

## Rules for every sender

These apply even if you only send a few emails a day:

- **Gmail:** SPF or DKIM on your sending domain, valid forward and reverse DNS (PTR) for sending IPs, TLS for transmission, messages formatted to RFC 5322, no impersonating Gmail From addresses, and a spam rate in Postmaster Tools below 0.3%.
- **Yahoo:** SPF or DKIM at minimum, valid forward and reverse DNS, RFC 5321 and 5322 compliance, and a complaint rate below 0.3%.
- **Microsoft:** its postmaster policies ask all senders to follow good practice, including a clear, working unsubscribe mechanism.

In practice, if you use Microsoft 365 or Google Workspace and have set up SPF and DKIM properly, the server-side items are handled for you. The weak points are third-party senders and website forms. Our emails going to spam guide covers the usual culprits.

## Extra rules for bulk senders

| Requirement | Gmail (from Feb 2024) | Yahoo (from Feb 2024) | Outlook.com (from 5 May 2025) |

| SPF | Required | Required | Must pass |
| DKIM | Required | Required | Must pass |
| DMARC | At least p=none | At least p=none, must pass | At least p=none; p=reject recommended |
| Alignment | From domain aligned with SPF or DKIM | From domain aligned with SPF or DKIM; relaxed is fine | Aligned with SPF or DKIM, preferably both |
| One-click unsubscribe | Required on marketing mail, plus a visible link | Required on marketing mail, plus a visible link | Not listed as a bulk requirement |
| Honour unsubscribes | Within 48 hours | Within 2 days | Not specified |
| Spam rate | Below 0.3%; aim for below 0.1% | Below 0.3% | Not specified |

Sources: Google's Email sender guidelines and FAQ, Yahoo's Sender Best Practices page and Microsoft's Outlook.com postmaster policies, all checked in November 2026. Google also recommends DKIM keys of 2048 bits where your provider supports it.

## One-click unsubscribe in practice

One-click unsubscribe is defined in RFC 8058. Your marketing emails need two headers:

`List-Unsubscribe: <https://example.co.uk/unsub?id=abc123>`
`List-Unsubscribe-Post: List-Unsubscribe=One-Click`

This lets Gmail and Yahoo show their own unsubscribe button, which removes the person without them visiting a page or logging in. You still need a visible unsubscribe link in the body. Yahoo says the RFC 8058 POST method is highly recommended and a mailto method is acceptable. Google gave senders with existing unsubscribe links until 1 June 2024 to add one-click unsubscribe.

You do not build this yourself. Mailchimp, Brevo, Campaign Monitor and similar tools add the headers automatically, but only for mail they send. If you send newsletters from Outlook or a CRM, check that it supports one-click unsubscribe.

## What happens if you do not comply

Google's FAQ says that starting November 2025 it is ramping up enforcement on non-compliant traffic, with temporary or permanent rejections, and that only senders meeting all the guidelines are eligible for help from Google's support channels. Microsoft's postmaster policy says non-compliant mail from high-volume senders goes to junk, and if problems are not fixed it may be rejected with the error `550; 5.7.515 Access denied, sending domain [SendingDomain] does not meet the required authentication level`. Yahoo says its requirements may change and asks senders to check its sender pages for updates.

If you see bounces with 5.7.515, or Gmail codes mentioning authentication or DMARC, the fix is almost always in your DNS records.

## A checklist, and how dijitul helps

- List every service that sends as your domain.
- One SPF record, under the 10 DNS lookup limit.
- DKIM on for each sender, signing with your domain, 2048-bit where possible.
- A DMARC record with a reporting address, starting at p=none.
- One-click unsubscribe and a visible link on all marketing mail.
- Google Postmaster Tools set up to watch your spam rate.
- Plan to move DMARC to quarantine or reject once reports are clean. That also opens the door to BIMI.

dijitul checks your current records, fixes SPF, DKIM and DMARC and confirms results from real message headers, at £45 an hour + VAT. See SPF, DKIM and DMARC records or call 01623 650333. For wider deliverability problems inside Microsoft 365, our sister site dijitul support can help.

## FAQs

### Do the Gmail bulk sender rules apply to my small business?

The bulk rules apply once you send close to 5,000 messages a day to personal Gmail accounts, and Google then treats you as a bulk sender permanently. The rules for all senders, such as SPF or DKIM and a spam rate under 0.3%, apply to everyone.

### What DMARC policy do Gmail, Yahoo and Microsoft require?

All three accept a DMARC policy of p=none as the minimum for bulk senders, as long as DMARC passes through SPF or DKIM aligned with your From address. Microsoft recommends p=reject. Moving to quarantine or reject also protects your domain from spoofing.

### What spam complaint rate is acceptable?

Google and Yahoo both say keep it below 0.3%. Google recommends staying below 0.1% and says senders at 0.3% or above are not eligible for mitigation. You can see your Gmail rate in Google Postmaster Tools.

### What does error 550 5.7.515 mean?

It is Outlook.com rejecting your mail because your sending domain does not meet Microsoft's authentication requirement for high-volume senders. Check that SPF and DKIM pass and that a DMARC record exists and aligns. dijitul can fix the records at £45 an hour + VAT.

### How fast must I process unsubscribes?

Google recommends within 48 hours and Yahoo says within 2 days. Most newsletter platforms do this instantly. If you manage lists by hand, remove people the same or next working day.

### Does Microsoft require one-click unsubscribe?

Microsoft's high-volume requirements focus on SPF, DKIM and DMARC. Its general policies ask for a clear, working unsubscribe mechanism. Adding one-click unsubscribe for Gmail and Yahoo covers Outlook.com too.

### When did the rules start?

Gmail and Yahoo from February 2024, with Gmail's one-click unsubscribe deadline on 1 June 2024 for senders who already had unsubscribe links. Microsoft's Outlook.com requirements took effect on 5 May 2025. Google says it stepped up enforcement from November 2025.

## Prices and contact

Domains are priced live in the client portal. DNS management and 10 mailboxes are included with dijihost Complete Hosting at £1 a day + VAT. On their own, DNS and email set-up is £45 an hour + VAT or a fixed quote. Domain search and registration: https://clients.dijitul.uk. Hosting: https://dijihost.co.uk/ (£1 a day + VAT). Contact: https://dijituldns.co.uk/contact/ · 01623 650333 · info@dijitul.uk
